XP61-C is an advanced high emissivity, thin film, spray applied ceramic boiler coating that has been specifically formulated to provide external corrosion and abrasion resistance while increasing thermal efficiency. Efficiency is accomplished by increasing thermal transfer of the process tubing while also retarding tenacious slagging and scaling.
XP61-C is a high solids coating system that can be applied to a dry film thickness of 6 to 20 mils (300 to 500 microns) on both carbon and stainless steel tubes. The coating is non flammable and non reactive and has no VOC (Volatile Organic Compound) content.
XP61-C can be easily applied and bonds well to properly prepared metal substrates. Due to its (water soluble) organic composition, XP61-C is very stable and will neither outgas nor cause skin irritations like many other high temperature coatings.
Working properties of the coating exhibit an extended shelf life prior to exposure to air. Upon curing XP61-C becomes a durable ceramic coating that will provide protection of boiler furnace tubing and other steel substrates to 1800° F (982° C).
XP61-C is also used and recommended for over-coating (sealing) industrial thermal sprayed coatings. A .004 to .008 (100-200 micron) thickness of XP61-C will provide increased thermal protection while sealing porosity and enhancing thermal sprayed coating surface characteristics.
Order Products or Samples
- Erosion Protection
- Increased Thermal Efficiency
- Superheater and reheater tubes
- Corrosion resistant